This application is met by two systems: The
Water FLUTe
system and the
Mini FLUTe
system.
The
Water FLUTe system
(1-20 ports) is for deeper applications in stable holes
(e.g., core holes in fractured rock or multi screened casing in unstable media).
For more information on the Water FLUTe system, go to Methods
(ground water sampling) or to Water FLUTe system. Water FLUTe installation procedures can be viewed or downloaded. Water FLUTe sampling procedures are also available. Hole diameters range from 3 inches to 12 inches, or greater.
The Water FLUTe system is:
- Quickly installed,
- Seals the entire hole,
- Easy to sample, and
- Removable.
The sampling volumes are especially large per pump stroke because of the unique Water FLUTe design.
The system geometry is shown in
Water FLUTe systems.
The Water FLUTe system is the most popular FLUTe system. Water FLUTe use is described in
Water FLUTe users.
The prices for Water FLUTe are provided as a function of number of ports and hole depth at
Water FLUTe prices.
Powerpoint presentations on the Water FLUTe system can be mailed to you. Contact us at
info@flut.com
to request our Powerpoint presentations.
The Mini FLUTe system
(1-3 ports) is installed through the interior of cone penetrometer rods or
Geoprobe rods in unstable sediments.
This system is:
- Quick to install
- Well sealed in the formation by the pressurized liner,
- Easy to sample, and
- Removable.
The method is described under
Mini FLUTe method.
A detailed description is provided at
Mini FLUTe system.
Prices are available at
Mini FLUTe prices.
The patented liner installation technique is the same as that frequently
used for the NAPL FLUTe color reactive liner.
Ask explicit questions of us at
info@flut.com.
